Your shopping cart is empty!
Solar wax melter for melting 2 frames of waxy raw materials utilizing sun rays. Its advantage is to use it directly outside.
The solar wax-up consists of a steel body painted with powder paint, a thickness of 0.5 mm of the glass cover and reinforcement with a tray of white food tin. The metal legs are attached to the body of the wax-up to establish it at an angle of 15 ° to the horizon. Solar wax melters set on a flat surface.
Between the glass and the metal cover, for sealing, a rubber gasket is installed. Solar wax melters are locked by means of latches. Close the lid of the Solar wax melters carefully in order to avoid breaking the glass.
During operation, the solar wax-up is installed on the legs. At the bottom edge of the reinforcement, holes are made through which the wax will flow into the pallet. The stamping will remain in the fittings.
The principle of solar waxwork. The raw material is poured into the valve and it is put into the body of the wax-up. Close the frame with the glass and snap it. The sun's rays heat up the wax-up inside to 75-90 °. The sun's rays are perpendicular to the glass and maintain a high temperature. After the wax is drowned from the wax-raw material, the drowning is poured out and a new raw wax is laid. Care must be taken to avoid burns when ripening the outflows. To effectively laying wax, outside temperature should be above 25 °.
Basket size inside solar wax melters: 600x480mm.
Excellent manual 3-Frame stainless steel
honey extractor, tangential, including 3 stabilizing legs...
340.00€ Ex Tax: 340.00€
Hole size (mm): 5Overall Dimensions (L x W x H) mm: 205.00 x 75.00 x 140.00..
7.55€ Ex Tax: 7.55€
Hole size (mm): 5Overall Dimensions (L x W x H) mm: 310.00 x 75.00 x 112.00..
8.50€ Ex Tax: 8.50€
Hole size (mm): 5Overall Dimensions (L x W x H) mm: 378.00 x 150.00 x 175.00..
15.00€ Ex Tax: 15.00€
Frame grip with wooden handle.Width: 115mm..
3.80€ Ex Tax: 3.80€